1. SEAL FOR CROSS-JOINT
Seal for protecting the needle bearing inside cross-joint, to prevent penetration of muddy water, dust, etc, from outside into the joint system.
2. DUST-COVER FOR INPUT-SHAFT
Elastic cover to prevent penetration of muddy water, dust, etc. from outside into the oil-seals installed on input-shaft.
3. OIL-SEAL FOR INPUT-SHAFT
Oil Seal with high pressure resistance for sealing valve of power steering gear system to maintain lubricant inside, as well as preventing the penetration of muddy water, dust, etc. from outside into the steering gear system.
4. BOOT FOR STEERING GEAR SYSTEM (HOUSING SIDE)
Boot type seal installed to cover the gear-housing of steering gear system, to protect the system from the damage by water, dust, stone, etc.
5. OIL-SEAL FOR PINION-SHAFT
An oil seal with high pressure resistance, for sealing inner mechanism of power steering gear system and to maintain lubricant.
6. O-RING (FOR STEERING GEAR SYSTEM)
O-ring installed in the space between torsion-bar and input-shaft, or in the space between valve-case and gear-housing.
7. DUMPER FOR STEERING GEAR MOUNT (MOUNTING DUMPER)
Dumper installed in steering gear system, a rubber component with function of absorbing the shock between front-suspension member and bracket.
8. PISTON SEAL FOR RACK-SHAFT OF STEERING GEAR SYSTEM
Oil seal made of PTFE, installed on the piston of rack-shaft of steering gear system, able to maintain the seal in function while it sliding inside cylinder.
9. OIL SEAL FOR RACK-SHAFT OF STEERING GEAR SYSTEM
Oil seal endurable reciprocating action for under high pressure with rack-shaft, installed at the both ends of cylinder-shaft for sealing the lubricant contained therein and maintaining inside hydro-pressure of cylinder.
10. SPACER FOR RACK-SHAFT
Installed at the end of rack-shaft for controlling rotary angle of steer and absorbing the shock by full steering.
11. DUST COVER FOR LINKAGE BALL JOINT
Covering the ball joint system for protecting the inner components from the damage by water, mud, dust, etc.
12. BOOTS TYPE SEAL FOR TUBE (STEERING GEAR SYSTEM)
Installed on cylinder of steering gear for protecting inner components from the damage by water, mud, dust, etc.